Food Surface Texture Measurement Using Reflective Confocal Laser Scanning Microscopy

ABSTRACT: Confocal laser scanning microscopy (CLSM) was used in the reflection mode to characterize the surface texture (roughness) of sliced food surfaces. Sandpapers with grit size between 150 and 600 were used as height references to standardize the CLSM hardware settings. Sandpaper particle sizes were verified by scanning electron microscopy (SEM). The mean amplitude (in micrometers) of surface variation along line segments of the scanned sandpaper topographical image sets showed very close agreement between the measured result and the grit particle size (based on the U.S. Coated Abrasive Manufactures Inst. {CAMI], standard). The verified instrument settings were then used to measure the surface texture of mechanically sliced food surfaces, including cooked ham, salami, and cheese. Sliced food surface texture parameters of Ra (average height of a line segment), Rs (surface area ratio), Pa (average height on a region of interest), and Pq (root‐mean‐square height on a region of interest) were evaluated by this method. Values of the surface roughness of sliced ham, salami, and cheese were found to be comparable to the range of dimensions of selected sandpapers. The CLSM method may be useful for other surface texture measurements, and to investigate the impact of food surface texture on microbial adhesion or attachment, which might play a significant role in microbial transfer from one surface to another.