催化作用
氧烷
介孔材料
化学
X射线光电子能谱
氧化物
介孔二氧化硅
化学工程
纳米颗粒
金属
过渡金属
无机化学
非阻塞I/O
扩展X射线吸收精细结构
吸收光谱法
光谱学
有机化学
物理
工程类
量子力学
作者
Kwangjin An,Selim Alayoǧlu,Nathan E. Musselwhite,Sheba Plamthottam,Gérôme Melaet,Avery E. Lindeman,Gábor A. Somorjai
摘要
The interaction of the metal and support in oxide-supported transition-metal catalysts has been proven to have extremely favorable effects on catalytic performance. Herein, mesoporous Co3O4, NiO, MnO2, Fe2O3, and CeO2 were synthesized and utilized in CO oxidation reactions to compare the catalytic activities before and after loading of 2.5 nm Pt nanoparticles. Turnover frequencies (TOFs) of pure mesoporous oxides were 0.0002–0.015 s(–1), while mesoporous silica was catalytically inactive in CO oxidation. When Pt nanoparticles were loaded onto the oxides, the TOFs of the Pt/metal oxide systems (0.1–500 s(–1)) were orders of magnitude greater than those of the pure oxides or the silica-supported Pt nanoparticles. The catalytic activities of various Pt/oxide systems were further influenced by varying the ratio of CO and O2 in the reactant gas feed, which provided insight into the mechanism of the observed support effect. In situ characterization using near-edge X-ray absorption fine structure (NEXAFS) and ambient-pressure X-ray photoelectron spectroscopy (APXPS) under catalytically relevant reaction conditions demonstrated a strong correlation between the oxidation state of the oxide support and the catalytic activity at the oxide–metal interface. Through catalytic activity measurements and in situ X-ray spectroscopic probes, CoO, Mn3O4, and CeO2 have been identified as the active surface phases of the oxide at the interface with Pt nanoparticles.
科研通智能强力驱动
Strongly Powered by AbleSci AI