High-Performance Broadband Photodetectors Combining Perovskite and Organic Bulk Heterojunction Bifunctional Layers

Perovskite can be used to prepare high-performance photodetectors due to its excellent optical properties. However, the detection range of perovskite photodetectors is mostly limited to the visible light range, restricting their further development and application. In recent years, combining perovskite with organic bulk heterojunctions to prepare photodetectors with broadband detection capability has proven to be an effective strategy. Through this approach, the response spectrum of the photodetector can be flexibly regulated, and organic compounds can improve the perovskite film quality by passivating defects and inhibit the penetration of water molecules in the air, thereby improving the device performance and stability. In this work, we propose and demonstrate the feasibility of combining MAPbI3 perovskite with PTB7-Th:COTIC-4F to prepare high-performance photodetectors with wide spectral response characteristics. With the assistance of an organic bulk heterojunction, the defects of perovskite crystals are effectively passivated, and the detection spectrum of the device is successfully extended to about 1100 nm. As a result, the responsivity achieved is 0.58 A/W, 1.19 A/W, and 1.41 A/W under laser illumination of 532 nm, 808 nm, and 980 nm, with the power density of 5 μW/cm2 at the bias voltage of −0.5 V, respectively, which is one of the best performances among vertical device structures of this type. Moreover, the stability of the final hybrid film has been greatly improved. This work provides a new approach to the preparation of high-performance and broadband perovskite photodetectors.