超级电容器
碳化
材料科学
电容
电化学
碳纤维
纤维
制作
化学工程
催化作用
木质素
功率密度
比表面积
电极
电流密度
复合材料
有机化学
扫描电子显微镜
化学
复合数
医学
功率(物理)
替代医学
物理
物理化学
病理
量子力学
工程类
作者
Linfei Zhou,Xiangyu You,Lingjie Wang,Shijie Qi,Ruichen Wang,Yasumitsu Uraki,Hui Jie Zhang
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2023-04-19
卷期号:15 (8): 1947-1947
被引量:8
标识
DOI:10.3390/polym15081947
摘要
Lignin-based carbon fibers (LCFs) with graphitized structures decorated on their surfaces were successfully prepared using the simultaneous catalyst loading and chemical stabilization of melt-spun lignin fibers, followed by quick carbonization functionalized as catalytic graphitization. This technique not only enables surficial graphitized LCF preparation at a relatively low temperature of 1200 °C but also avoids additional treatments used in conventional carbon fiber production. The LCFs were then used as electrode materials in a supercapacitor assembly. Electrochemical measurements confirmed that LCF-0.4, a sample with a relatively low specific surface area of 89.9 m2 g−1, exhibited the best electrochemical properties. The supercapacitor with LCF-0.4 had a specific capacitance of 10.7 F g−1 at 0.5 A g−1, a power density of 869.5 W kg−1, an energy density of 15.7 Wh kg−1, and a capacitance retention of 100% after 1500 cycles, even without activation.
科研通智能强力驱动
Strongly Powered by AbleSci AI