静态随机存取存储器
德拉姆
宏
计算机科学
动态随机存取存储器
CMOS芯片
任务(项目管理)
并行计算
计算机硬件
嵌入式系统
电气工程
半导体存储器
工程类
程序设计语言
系统工程
作者
Guodong Yin,Yiming Chen,Mufeng Zhou,Wenjun Tang,Mingyen Lee,Zekun Yang,Tianyu Liao,Xirui Du,Vijaykrishnan Narayanan,Huazhong Yang,Hongyang Jia,Yongpan Liu,Xueqing Li
出处
期刊:IEEE Journal of Solid-state Circuits
[Institute of Electrical and Electronics Engineers]
日期:2023-11-07
卷期号:59 (6): 1912-1925
被引量:29
标识
DOI:10.1109/jssc.2023.3326955
摘要
Owing to the mature process and low access energy, static random-access memory (SRAM) has become a promising candidate for compute-in-memory (CiM) acceleration of multiply-accumulate (MAC) operations. However, SRAM-based CiM cells have rather low density and thus very limited total on-chip memory capacity. This fact, unfortunately, results in undesired weight data reload operations from the off-chip dynamic random-access memory (DRAM) in data-intensive scenarios and may even tarnish the energy efficiency of CiM at the task level. Therefore, exploration toward higher density CiM in CMOS is critical to ensure truly high energy efficiency in practice. Aligned with the goal of ultrahigh density, this article presents the first one-transistor (1T) multi-level-cell (MLC) read-only memory (ROM) CiM macro for multi-bit MAC. The highlights of the proposed ROM CiM techniques include: 1) multi-source-driven (MSD) 1T-MLC ROM; 2) charge-domain capacitor sharing (CDCS) for ultrahigh CiM memory density; and 3) ROM-based transfer-learning architectures to provide flexible support of different tasks with minor accuracy degradation. These techniques are demonstrated with a fabricated 2-Mb 1T-MLC ROM CiM macro for 8 b$\times$8 b MAC computing. This macro features a record-high cell density of 0.096-$\mu$m$^{2}$/bit and a macro weight density of 3984 kb/mm$^{2}$in a 65-nm pure CMOS technology. It also achieves 3.8$\times$–55.3$\times$lower energy consumption per image inference than the state-of-the-art CiM macros when considering the possible DRAM access.
科研通智能强力驱动
Strongly Powered by AbleSci AI