迷惑
混合器
混合(物理)
压力降
雷诺数
强度(物理)
机械
材料科学
下降(电信)
机械工程
计算流体力学
结构工程
工程类
计算机模拟
微流控
微型反应器
计算机科学
模拟
工程制图
作者
Liyu Xia,Yuanyuan Ma,Tianyi Su,Chuankai Li,Xiang Li,Di Yang
标识
DOI:10.1088/1361-6439/ae27d6
摘要
Microreactors (micromixers) are crucial components in microfluidic systems, widely used in biomedical and chemical engineering. This study proposes a flexible-baffle micromixer to address the challenge of balancing high mixing efficiency and pressure drop in rigid-baffle systems. Using numerical simulations combined with dynamic mesh technology, the study optimizes key structural parameters, including the number, spacing, and length of flexible baffles (rectangular, trapezoidal, and triangular). Results show that, when the number of rectangular flexible baffles is 5 pairs, mixing intensity increases by 1.24%. For trapezoidal and triangular baffles, mixing intensity increases by 0.39% and 0.52% when 6 pairs are used. With optimal baffle number and length, mixing intensity improves with a spacing of 0.3 mm for rectangular and trapezoidal baffles (0.46% and 0.08%, respectively) and 0.4 mm for triangular baffles (0.66%). Additionally, when the baffle length is 0.7 mm, mixing intensity increases by 0.44%, 0.79%, and 1.12%, respectively. Flexible baffles achieve higher mixing intensity than rigid baffles while maintaining a lower pressure drop. The study also finds that for Re < 20, mixing efficiency is low, but increases with higher Reynolds numbers, stabilizing at Re ⩾ 50. High-viscosity fluids (like glycerol) reduce mixing efficiency, but pressure drop remains low. Changes in Young’s modulus ( 1 × 1 0 5 ∼ 1 × 1 0 6 Pa) have minimal impact on mixing performance. The flexible-baffle micromixer offers an optimal balance of high mixing efficiency and low pressure drop, showing great potential for chemical and biological applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI