Joint State-of-Charge and State-of-Available-Power Estimation Based on the Online Parameter Identification of Lithium-Ion Battery Model

This article presents a joint state-of-charge (SOC) and state-of-available-power (SOAP) estimation method based on online battery model parameter identification. First, the SOAP of lithium-ion batteries is analyzed thoroughly, and a safe operating area border-based (SOAB-based) SOAP estimation is proposed. Second, based on the adaptive battery-state estimator (ABSE) and improved ABSE, a joint SOC and SOAB-based SOAP estimation method is proposed. The joint estimation results show that the improved ABSE achieves higher accuracy than the ABSE at different battery aging states. The open-loop accuracy evaluation results show that the improved ABSE identifies the battery model parameters more accurately, and the ABSE algorithm error source lies in its identified Rp being much higher than the actual value when the battery is charged/discharged at a high current. The ABSE does not consider the influence of load current on the equivalent circuit model parameters, so it is not suitable for SOAP estimation in theory. The improved ABSE proposed by our team can eliminate this modeling error, identify the battery model parameters, and estimate the SOC and SOAB-based SOAP more accurately. This improved ABSE is an effective algorithm for estimating the battery state when the battery is charged/discharged with a high current.