Volatile organic compounds and odor emissions from alkyd resin enamel-coated particleboard

To solve the odor emission problem of lacquer veneer particleboards, as well as to identify the key odor compounds and their sources, alkyd resin enamel-coated particleboards were studied via gas chromatography-mass spectroscopy-olfactometry. A single-factor experiment was established under various environmental conditions. The odor-causing compounds were identified, and the effects of environmental factors on the volatile organic compounds (VOCs) and odor emissions were investigated. The results showed that the main odor substances released from the alkyd resin enamel-coated particleboard were aromatic compounds, aldehydes, and alkanes, which are typically low in toxicity. The total volatile organic compounds concentration and total odor intensity increased as the temperature and relative humidity increased, but decreased as the air exchange rate to loading factor ratio increased. The temperature had a greater impact on the release of VOCs from the alkyd resin enamel-coated particleboard than either the relative humidity or air exchange rate to loading factor ratio. The odor substances concentration increased with an increase in the temperature, while the relative humidity and air exchange rate to loading factor ratio had little effect.