Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion

材料科学 极限抗拉强度 微观结构 合金 多孔性 开裂 铝 复合材料 冶金 产量(工程)
作者
Abhishek Mehta,Le Zhou,Thinh Huynh,Sharon Park,Holden Hyer,Shutao Song,Yuanli Bai,D. Devin Imholte,Nicolas E. Woolstenhulme,Daniel M. Wachs,Yongho Sohn
出处
期刊:Additive manufacturing [Elsevier BV]
卷期号:41: 101966-101966 被引量:254
标识
DOI:10.1016/j.addma.2021.101966
摘要

For additive manufacturing such as laser powder bed fusion (LPBF), commercial aluminum alloy (AA) 6061 is typically considered unsuitable due to formation of solidification cracking and/or excessive porosity. In this study, to improve buildability/printability of AA6061, 1 wt% of Zr was alloyed to produce Zr-modified AA6061 by LPBF. Powders of unmodified and Zr-modified AA6061 were produced by gas atomization, and utilized as a feed-stock for the LPBF to fabricate specimens for microstructural examination and mechanical testing. The as-built unmodified AA6061 exhibited poor printability due to formation of cracks and porosity in the microstructure regardless of LPBF parameters. However, the Zr-modified AA6061 exhibited near full density, with substantial reduction in porosities without any solidification crack for a certain LPBF processing window. The improved printability of Zr-modified AA6061 was attributed to a significant grain refinement, which would reduce the solidification cracking susceptibility by hampering the epitaxial growth of long columnar cracks, as observed in unmodified AA6061. Yield strength, tensile strength and strain-at-failure for the as-built Zr-modified AA6061 were determined to be 210 MPa, 268 MPa, and 26.5%, respectively. These are superior to the tensile properties of AA6061 in O-annealed condition or in as-cast condition. After T6 heat treatment, yield strength, tensile strength and strain-at-failure of Zr-modified AA6061 were determined to be 300 MPa, 327 MPa, and 14%, which were again superior to the tensile properties of wrought AA6061 in T6 heat treated condition. Effects of Zr addition on the buildability/printability improvement and mechanical properties of AA6061 were corroborated by a variety of electron microscopic characterization.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
胡辣汤放糖完成签到,获得积分10
刚刚
科研通AI2S的应助被LEETHEO采纳,获得10
刚刚
journyjonas完成签到,获得积分10
刚刚
zewenjiang发布了新的文献求助10
刚刚
刚刚
一颗秋蝶完成签到,获得积分10
刚刚
Charlie发布了新的文献求助10
1秒前
1秒前
1秒前
纯情的浩然完成签到,获得积分10
1秒前
头发多多完成签到,获得积分10
1秒前
2秒前
2秒前
马照坤完成签到,获得积分10
2秒前
老帅比发布了新的文献求助10
2秒前
无敌啊豹完成签到,获得积分10
3秒前
min完成签到,获得积分10
3秒前
文献查找完成签到,获得积分10
3秒前
homelander完成签到,获得积分10
4秒前
橙尘尘完成签到,获得积分10
4秒前
4秒前
秋风的应助被穆礼稀采纳,获得20
4秒前
谨慎果汁发布了新的文献求助10
4秒前
独特乘云完成签到,获得积分10
4秒前
自立完成签到 ,获得积分10
5秒前
喝口可乐的应助被无昵称采纳,获得10
5秒前
微笑发布了新的文献求助10
5秒前
rr完成签到 ,获得积分10
5秒前
zyl完成签到,获得积分10
5秒前
快乐的哈密瓜完成签到,获得积分10
6秒前
6秒前
6秒前
爆米花的应助被LEETHEO采纳,获得10
6秒前
科研通AI2S的应助被sheeptime采纳,获得10
7秒前
7秒前
星辰大海的应助被mkl采纳,获得10
7秒前
july7292发布了新的文献求助10
7秒前
8秒前
鲁滨逊读研记完成签到,获得积分10
8秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8180488
求助须知:如何正确求助?哪些是违规求助? 9570485
关于积分的说明 21812623
捐赠科研通 7776592
什么是DOI,文献DOI怎么找? 3433286
关于科研通互助平台的介绍 2557522
邀请新用户注册赠送积分活动 2479162