聚丙烯腈
材料科学
超细纤维
光催化
可见光谱
静电纺丝
化学工程
制作
纳米技术
复合材料
聚合物
催化作用
光电子学
化学
有机化学
工程类
病理
医学
替代医学
作者
Mingyi Zhang,Changlu Shao,Peng Zhang,Chunyan Su,Xin Zhang,Pingping Liang,Yangyang Sun,Yichun Liu
标识
DOI:10.1016/j.jhazmat.2012.05.006
摘要
In this paper, Bi(2)MoO(6) microtubes (BMO-MTs) were obtained by a two-step fabrication route. By using the electrospun polyacrylonitrile (PAN) microfibers as structure-directing hard template and through ethylene glycol solvothermal method, polyacrylonitrile/Bi(2)MoO(6) (PAN/BMO) hybrid microfibers with core-shell structures were prepared. Through heat treatment of the as-prepared PAN/BMO to remove the PAN core, Bi(2)MoO(6) with tubes-structured were obtained. The thickness of BMO-MTs was controlled by changing the Bi(2)MoO(6) loading percentage of PAN/BMO which could be obtained through ethylene glycol solvothermal process with precursor different concentration for the preparation of Bi(2)MoO(6). And, the crystal structure and morphology of BMO-MTs strongly depended on the calcination temperature when heat-treating the as-prepared PAN/BMO. Photocatalytic tests show that the BMO-MTs possess a much higher degradation rate of Rhodamine B (RB) than that of Bi(2)MoO(6) prepared by solid-state reaction and conventional P25. The improved photocatalytic performance could be ascribed to the hollow multi channelled structure and large surface area. The BMO-MTs could be reclaimed easily by sedimentation from the photocatalytic reaction solution due to the large length to diameter ratio of one-dimensional tubes structures. Moreover, such simple and versatile strategy can provide a general way to fabricate other tubes structures of Bi(III)-containing oxides, such as Bi(2)WO(6) and BiVO(4) microtubes.
科研通智能强力驱动
Strongly Powered by AbleSci AI