材料科学
介电谱
法拉第效率
阴极
表面改性
涂层
锂(药物)
溶解
化学工程
电化学
分析化学(期刊)
单晶
复合材料
电极
结晶学
化学
工程类
医学
内分泌学
物理化学
色谱法
作者
Wenhui Hu,Ya Jun Yin,Ya Sun,Guo-Xue Liu,Shun-Yi Yang,Youyuan Huang,Bo Wang
出处
期刊:Rare Metals
[Springer Science+Business Media]
日期:2023-06-06
卷期号:42 (8): 2612-2621
被引量:17
标识
DOI:10.1007/s12598-022-02213-9
摘要
Abstract Ni‐rich cathode materials will be primarily used as next‐generation high‐specific energy cathode materials in lithium‐ion batteries. However, residual Li formation and cracking considerably restrict the wide application of these materials. To address the issues related to cracking, micro‐sized single‐crystal cathode materials without internal grain boundaries are proposed. In this study, we constructed a thin LiBO 2 layer on the single‐crystal LiNi 0.83 Co 0.07 Mn 0.10 O 2 particles by solvent‐free H 3 BO 3 modification. The residual Li on the material surface decreased by 14% through the reaction of LiOH/Li 2 CO 3 and H 3 BO 3 . The coated materials exhibited higher initial Coulombic efficiency (88.44%), higher reversible capacity (213.4 mAh·g −1 at 0.1C), and better cycling performance (91.31% retention over 50 cycles within 3.0–4.3 V at 1.0C) than the unmodified materials. Using the galvanostatic intermittent titration technique, electrochemical impedance spectroscopy (EIS), and inductively coupled plasma‐optical emission spectroscopy (ICP‐OES), we reveal the mechanism by which the electrochemical properties are improved upon H 3 BO 3 modification. The superior electrochemical performances are associated with increased Li + conductivity, lower charge transfer impedance, and suppressed transition metal dissolution. Therefore, this study demonstrates the importance of surface modification in obtaining Ni‐rich single‐crystal materials with enhanced performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI