材料科学
复合材料
偷看
雷亚克夫
内聚力模型
分子动力学
聚合物
胶粘剂
有限元法
纤维
碳纤维增强聚合物
断裂(地质)
复合数
结构工程
图层(电子)
原子间势
化学
计算化学
工程类
作者
Gideon A. Lyngdoh,Sumanta Das
标识
DOI:10.1021/acsami.2c09881
摘要
This paper implements molecular dynamics (MD) simulation using reactive force field (ReaxFF) to evaluate the atomistic origin of the interfacial behavior in the overmolded hybrid unidirectional continuous carbon fiber low-melt PAEK (CFR-LMPAEK)-short carbon fiber reinforced PEEK (SFR-PEEK) polymer composites. From the MD simulation, it was observed that the interfacial properties improve with increasing maximum processing temperature and injection pressure although such an improving trajectory gets saturated beyond specific limits. The interfacial strength and fracture response of the hybrid polymer system at the interface are also evaluated. The mechanical responses obtained from MD simulation are used as adhesive properties in the macroscale finite element analysis (FEA)-based single lap joint (SLJ) model where the interfacial behavior between the adherends (CFR-LMPAEK and SFR-PEEK) is implemented using cohesive zone model (CZM). The simulated FE results show a good correlation with the SLJ experimental data. Thus, by linking the interfacial properties at the molecular scale to the performance of the interfacial bond at the macroscale, the comprehensive approach presented here opens up various efficient avenues toward atomistically engineered performance tuning in hybrid overmolded fiber-reinforced polymer composites to meet desired large-scale performance needs.
科研通智能强力驱动
Strongly Powered by AbleSci AI