Improvement of the Ferroelectric Response of La-Doped Hafnium Zirconium Oxide Employing Tungsten Oxide Interfacial Layer with Back-End-of-Line Compatibility

In this work, the impact of a tungsten oxide (WO3) seed and capping layer for ferroelectric La-doped (Hf, Zr)O2 (La:HZO) based capacitors, designed with back-end-of-line (BEOL) compatibility, is systematically investigated. The WO3 capping layer supplies oxygen to the La:HZO layer throughout the fabrication process and during device cycling. This facilitates the annihilation of oxygen vacancies (Vo) within the La:HZO layer, thereby stabilizing its ferroelectric orthorhombic phase and resulting in an increase of the remanent polarization (Pr) value in the capacitor. Moreover, the effectiveness of the WO3 capping layer depends on the seed layer of the HZO film, suggesting that proper combination of the seed and capping layers should be employed to maximize the ferroelectric response. Finally, a TiN/TiO2 seed layer/La:HZO/WO3 capping layer/TiN capacitor is successfully fabricated and optimized by a complete set of atomic layer deposition (ALD) processes, achieving a superior 2Pr value and endurance value of more than 109 cycles at an electric field of 2.5 MV/cm. The WO3 capping layer is anticipated to offer a viable solution for doped HZO capacitors with reduced thickness, addressing the challenge of elevated Vo levels that favor the tetragonal phase and result in low 2Pr values.