Effect of beeswax on the physico-mechanical properties of poly (butylene adipate terephthalate)/poly lactic acid blend films

Abstract Conventional plastics derived from petroleum resources have dominated the packaging sector. However, the use of such plastics has resulted in environmental issues. Research on development of biodegradable plastics has gained momentum. In the present work, eco-sustainable poly (butylene adipate terephthalate) (PBAT)/poly lactic acid (PLA) blend films have been developed with beeswax as an additive. Films have been made by blending biopolymers PBAT with PLA. Beeswax, as an additive has the ability to enhance the water vapour and oxygen barrier properties films. Beeswax content has been varied in the films (0, 0.5, 1 and 2 wt.%). The prepared films have been characterized for their mechanical (tensile testing), water absorption, morphological and biodegradation behavior. Maximum tensile strength has been observed for film containing 1 wt.% of beeswax. Water absorption of the films has been lowered by addition of beeswax. Based on the obtained results, 1 wt.% of beeswax addition has been found to be suitable for PBAT/PLA blend films.