摘要
Biofouling reduces the performance and increases the functioning costs of water filtration membranes. A solution to this problem explored by researchers is to modify membranes to create surfaces with anti-biofouling properties, focusing on reducing initial bacterial adhesion. The present work proposes bioinspired strategies to create multifunctional surfaces that not only reduce initial bacterial adhesion but also inhibit/remove biofilm formation. The first strategy coats polyethersulfone (PES) membranes with vanillin, a bioactive molecule with physicochemical and biological effects against biofouling. The second strategy involves coating PES membranes with a copolymer (AZO-SBMA) made of a 1) zwitterionic chain, sulfobetaine methacrylate (SBMA), to reduce foulant adhesion, and 2) photodynamic chain, azobenzene (AZO), to remove remaining foulants through rapid oscillatory movements under UV/Visible light irradiation. The objectives of this PhD are to optimise these membrane modification strategies, characterise the surface properties and the anti-biofouling effects, and evaluate stability and filtration performance.New approaches to assess membrane surface properties and anti-biofouling effects were used through a multiscale characterisation approach. At the macroscale, Fourier-Transform Infrared (FTIR) mapping visualised the distribution of the modifier over the membrane’s surface. At the microscale, scanning electron microscopy (SEM) and epifluorescence microscopy (EFM) depicted biofouling at the population scale. At the nano- and microscale, atomic force microscopy (AFM) characterised the membrane’s inherent physico-chemical properties and measured the adhesion forces between bacterial cells/biofilm and the membrane. This approach correlated the surface properties of modified membranes to their performances at various size scales. In particular, the coating conditions using vanillin (PES-VAN) and AZO-SBMA copolymer (PES-AS) solutions were optimized. Localized measurements using AFM revealed changes in the surface properties of modified membranes: inherent hydrophobicity and surface roughness. This was correlated with the membranes’ permeability and anti-biofouling properties at the macroscale.Specifically, in anti-biofouling assessment, SEM and direct biofouling observation using EFM showed that PES-VAN and PES-AS reduced bacterial cell adhesion and biofilm development at the population scale under static conditions. However, since these methods do not directly quantify the adhesion forces of foulants onto a surface, AFM was further used to determine if the adhesive forces between the surface and the foulant could be reduced, which is crucial for effective biofouling prevention or remediation strategies. For that, we used single-cell force spectroscopy (SCFS), a known technique to first study individual cell adhesions. Lastly, we developed a new method using fluidic force microscopy (FluidFM) to investigate the behaviour of biofilms instead of single cells, providing a holistic perspective. Results revealed the reduction in adhesion forces after membrane modification, from initial bacterial adhesion (single-cell) to biofilm maturation. This work shows that vanillin and AZO-SBMA limit bio-adhesion and biofouling on filtration membranes, potentially reducing the cleaning procedure's frequency. The proposed surface modification methods are simple and adaptable to water treatment applications making them suitable for industrial settings. Furthermore, the proposed characterisation methods and improved force spectroscopic techniques enabled studies closer to the realistic condition. These methods contribute to the development of anti-biofouling surfaces (membranes, medical devices, food packaging) and facilitate the development of cleaning procedures for industrial membrane processes.