材料科学
抛光
立方氧化锆
研磨
陶瓷
复合材料
表面粗糙度
表面光洁度
抗弯强度
作者
ZHIWEI ZHOU,Yuwei Liu,WANQIONG NIU,LIJUAN REN,Zhenhua Wang
标识
DOI:10.1142/s0219519422400358
摘要
Purpose: This study investigated the effects of grinding, polishing and aging on physical properties using self-made zirconia and commonly used ultraclear ceramic materials and glass ceramics in the clinic. Methods: The samples were prepared using 3% yttria-stabilized zirconia ceramic (3Y-TZP) powder containing alumina, which was granulated by ball milling. Then, it is pressed into a circular sheet together with Upcera and Wieland materials. The glass ceramic materials are molded. Finally, all materials were subjected to hydrothermal aging. Results: The self-made zirconia had better permeability than the commonly used ultratransparent ceramic materials and glass ceramics. The polishing after grinding improved the surface morphology and roughness of tooth transparent ceramic materials; Polishing after grinding improved the aging resistance of zirconia materials. The bending strength of self-made samples was less than that of two kinds of ceramics commonly used in clinic, but greater than that of glass ceramics. Aging improved the bending strength of zirconia. Conclusions: The self-made zirconia had better permeability than ultratransparent all-ceramic materials and glass ceramics, and its bending strength was better than that of glass ceramics. Grinding and polishing could improve not only the surface morphology and roughness but also the strength and aging resistance.
科研通智能强力驱动
Strongly Powered by AbleSci AI