光催化
漫反射红外傅里叶变换
热重分析
催化作用
钼
傅里叶变换红外光谱
烟气脱硫
光谱学
煅烧
材料科学
核化学
可见光谱
化学
无机化学
化学工程
有机化学
物理
量子力学
工程类
光电子学
作者
Mehdi Beshtar,Farhad Khorasheh,Afsanehsadat Larimi,Ali Akbar Asgharinezhad
出处
期刊:Fuel
[Elsevier BV]
日期:2023-12-05
卷期号:360: 130549-130549
被引量:51
标识
DOI:10.1016/j.fuel.2023.130549
摘要
Iron and molybdenum-activated CeO2 nanoparticles were utilized in a photocatalytic oxidation reaction in order to eliminate sulfur compounds from a model fuel. The catalyst was synthesized through a two-step process and then calcined for 3 h at 600 °C. The physicochemical properties of the synthesized nanophotocatalyst were characterized using a range of techniques, including X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS), photoluminescence spectroscopy (PL), nitrogen adsorption–desorption, and thermogravimetric analysis (TGA). The sample of Fe1Mo2/CeO2 exhibited superior performance in the photocatalytic oxidative desulfurization (PODS) reaction. The PODS reaction parameters, such as the initial sulfur concentration, photocatalyst dosage, temperature, solvent-to-fuel volume ratio (S/F), and oxidant-to-sulfur molar ratio (O/S), underwent optimization. Under ideal circumstances (T = 50 ℃, photocatalyst dosage = 2 g/L, O/S = 6, and S/F = 1), a 100% conversion rate of DBT was achieved. The kinetic studies showed that the PODS reaction follows the pseudo-first order kinetic model, and the activation energy measured was 39.44 kJ/mol−1.
科研通智能强力驱动
Strongly Powered by AbleSci AI