岩土工程
类型(生物学)
结构工程
隧道施工
工程类
地质学
材料科学
古生物学
作者
Zhichun Liu,Fei Wu,Y S Wang,Xiaolong Guo,Xinwen Lin,Lay Boon Tan
摘要
ABSTRACT To address the challenges of large deformation, prolonged deformation time, and inadequate support force in squeezing surrounding rock tunnels, a novel graded yield bolt has been developed. The mechanical properties of this new yield bolt were investigated through laboratory tests and numerical simulations. The analysis focused on the effects of the wall thickness of both large and small gradient sleeves, as well as the length and inclination angle of the resistance‐increasing head on the mechanical properties of the bolt. Furthermore, based on deformation classification and utilizing numerical simulation software, the supporting effectiveness of the yielding anchor under various deformation levels was examined. The results indicate that the new yielding bolt exhibits a graded yielding function, which can be categorized into three stages: elastic deformation, first yielding, and second yielding. The yield load value increases with the wall thickness of the large gradient sleeve and the length of the resistance‐increasing head. The yield load initially increases and then decreases with increasing wall thickness of the small gradient sleeve, and it decreases with an increase in the inclination angle of the resistance‐increasing head. Regardless of the deformation grade, the performance of the new yield bolt surpasses that of conventional bolts, with the advantages of the new yield bolt becoming more pronounced at higher deformation grades.
科研通智能强力驱动
Strongly Powered by AbleSci AI