锂(药物)
氧化物
氧化镍
镍
图层(电子)
阴极
材料科学
化学工程
冶金
纳米技术
化学
物理化学
内分泌学
医学
工程类
作者
Lei Li,Qiwen Ran,Qiang Hu,Yuyao Ji,Xingquan Liu
标识
DOI:10.1016/j.jallcom.2023.170032
摘要
High-nickel layered oxide LiNi0.9Co0.1O2 is considered as potential cathode materials for next-generation lithium-ion batteries. However, there are still some challenges such as interface side reactions, microcracks and the residual lithium compounds (LiOH and Li2CO3). In this work, a phospholipid-like protective layer of YPO4-Li3PO4 is designed to selectively pass Li+ and consume residual lithium compounds, thus greatly suppressing interface side reactions, especially at high temperature conditions. In the as-designed phospholipid-like protective layer, the ionic conductor Li3PO4 provides efficient Li+ channels and enhances Li+ transport, while YPO4 relieves stress during cycling. Consequently, the modified high-nickel layered oxide has a superior cycling performance at high temperature (50 ℃) with a capacity retention of 86.3% after 100 cycles, which is much higher than that of bare high-nickel layered oxide cathode (58.2%). This work provides a convenient strategy for other layered oxide cathode to repair and stabilize surface/interface.
科研通智能强力驱动
Strongly Powered by AbleSci AI