Synthesis, utilization, and recycling of graphene oxide-based nanohybrid biopolymeric hydrogels for purification of dye wastewater

ABSTRACT Wastewater from industries contributes significantly to pollution. Adsorption of acidic dye using nanohybrid biopolymeric hydrogels has evolved as one of the viable techniques. Graphene oxide (GO)/chitosan (CS)–polyvinyl alcohol (PVA), GO/starch–PVA, and GO/agar–PVA hydrogels were synthesized. The results revealed that the following are the ideal values: GO/CS–PVA: 3 pH (8.251 mg g−1), 0.05 g/50mL dosage (8.251 mg g−1), 90 min (8.251 mg g−1), 12 ppm dye concentration (8.251 mg g−1), and 30 °C (8.251 mg g−1); for GO/starch–PVA: 2 pH (7.437 mg g−1), 0.05 g/50 mL dosage (7.437 mg g−1), 90 min (7.437 mg g−1), 12 ppm dye concentration (7.437 mg g−1), and 30 °C (7.437 mg g−1); and for GO/agar–PVA; 3 pH (6.142 mg g−1), 0.05 g/50 mL dosage (6.142 mg g−1), 90 min (6.142 mg g−1), 12 ppm dye concentration (6.142 mg g−1), 30 °C (6.142 mg g−1). GO/CS–PVA outperformed the other hydrogels. The Langmuir model suited GO/CS–PVA data, while GO/starch–PVA and GO/agar–PVA hydrogels followed Freundlich isotherm models. The adsorption capacity data followed a pseudo-second-order model. Negative value of Gibbs free energy and enthalpy showed that the reactions were spontaneous and exothermic in nature. The presence of heavy metals, electrolytes, and detergents/surfactants affected the dye adsorption. Entropy changes positive values implied randomness at the solid/solution contact. The desorption (60, 55, and 58%) of GO/CS–PVA, GO/starch–PVA, and GO/agar–PVA hydrogels was obtained using 0.5 N NaOH. Scanning electron microscope, X-ray diffraction, and Fourier transform infrared (FT-IR) were used for characterization.