3d打印
推进
气泡
粘度
材料科学
3D打印
复合材料
机械工程
纳米技术
航空航天工程
生物医学工程
机械
物理
工程类
作者
Yin Chen,Mingliang Li,Qianqian Tang,Yifan Cheng,Anqi Miao,Liang Cheng,Shilu Zhu,Tingting Luo,Guangli Liu,Lijiu Zhang,Fuzhou Niu,Liang Zhao,Jialong Chen,Runhuai Yang
标识
DOI:10.1002/aisy.202200311
摘要
Untethered synthetic microrobots have significant potential to revolutionize biomedical interventions therapy in the future. However, the relatively slow speed of microrobots and viscosity biofluid environments are some of barriers standing in the way of microrobots’ biomedical applications. Herein, inspired by high‐speed biological escape propulsion, NIR‐driven microrobots with a high‐speed, unidirectional propulsion in the high‐viscosity liquid are proposed. The bubble's growth and ejection cause the proposed 3D‐printed microrobot to propel forward. The 3D‐printed claw‐like microrobot achieves motion average speed of 1.4 mm s−1 (three‐body length (bl) s−1) when driven by NIR light in a pure glycerol viscous (945 mPa s, 25 °C) environment, which has a viscosity that is more than 200 times the viscosity of blood and of 54 mm s−1 (120 bl s−1) when driven by NIR light in deionized (DI) water. This work provides more ideas for the design and propulsion of light‐driven microrobots in a high‐viscosity vivo environment, which may broaden the applications of microrobots in the biomedical field, such as propulsion and navigation in confined and hard‐to‐reach body location areas.
科研通智能强力驱动
Strongly Powered by AbleSci AI