合成气
蜡烛
tar(计算)
木材气体发生器
颗粒
蒸汽重整
催化作用
化学工程
催化重整
流化床
填充床
废物管理
合成气制汽油
萘
材料科学
化学
有机化学
制氢
复合材料
煤
工程类
程序设计语言
计算机科学
作者
Andrea Di Giuliano,Pier Ugo Foscolo,Andrea Di Carlo,Andrew Steele,Katia Gallucci
标识
DOI:10.1021/acs.iecr.0c05131
摘要
Filtering-catalytic candles, filled with an annular packed-bed of commercial Ni-catalyst pellets (∼600 g), were successfully tested for in situ syngas cleaning in a fluidized-bed biomass steam gasifier [Fuel Process. Technol.2019, 191, 44-53, DOI: 10.1016/j.fuproc.2019.03.018]. Those tests enabled the macroscopic evaluation of gasification and gas cleaning as a whole, requiring a more specific assessment of the catalyst performance inside the filter candle. To this end, steam reforming tests of tar key compounds (naphthalene and toluene; thiophene in traces to observe sulfur deactivation) were performed with a laboratory-scale packed-bed reactor containing the same catalyst pellets (<7 g). A lumped kinetics was derived, referred to a pseudocomponent representing tars. This was then validated by simulation of the annular catalytic packed bed inside the filter candle, obtaining numerical results in fair agreement with gasifier outputs. As a result, the lab-scale investigation with a small amount of catalyst provides reliable predictions of tar catalytic reforming in industrial-scale filtering-catalytic candles.
科研通智能强力驱动
Strongly Powered by AbleSci AI