立体光刻
材料科学
拓扑(电路)
拓扑优化
多孔性
压缩(物理)
网络拓扑
复合材料
机械工程
计算机科学
工程制图
有限元法
结构工程
工程类
操作系统
电气工程
作者
Tao Liu,Sofiane Guessasma,Jihong Zhu,Weihong Zhang,Sofiane Belhabib
标识
DOI:10.1016/j.eurpolymj.2018.08.038
摘要
Abstract This work reports an integrated strategy to develop functionally graded materials using additive manufacturing technology. Topology optimisation is exploited to design porous structures with controlled amount and distribution of porosity. Designs are printed using stereolithography and their compression behaviour is determined. Designs are scaled down to form unit cells for functionally graded materials with contrasted mechanical properties. The designed unit cells demonstrate a wide variety of performance, which is achieved when combining topology optimisation and additive manufacturing. The compression performance of designed functionally graded materials exhibits distinctive behaviour depending on the nature and arrangement of unit cells. This study concludes on the high potential of topology optimisation and stereolithography to promote 3D printed designs with property-controlled structures.
科研通智能强力驱动
Strongly Powered by AbleSci AI