Layered transition-metal oxides LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM 622) due to their poor stability when worked at high operating voltage have limited their applications in industy. In this study, La 2 O 3 is coated on NCM 622positive electrodes via a facile solvothermal method. The scanning electron microscopy (SEM) and EDS test results show that La 2 O 3 nano-particles are successfully coated on the surface of NCM 622 samples. The favorable Li-ion conductivity of the La 2 O 3 -modified NCM 622 sample lead to obvious improvement in its electrochemical performances. In particular, the coated sample exhibits a capacity retention over 80% at 1 C after 100 cycles at a high cut-off voltage of 4.5 V, while that of the bare electrode is less than 60%. The alternating current impedance and cyclic voltammetry (CV) tests show that the La 2 O 3 coating can effectively restrain the electrode polarization and reduce the Li-ion charge transfer resistance of cathode materials.