Optimizing program calibration of JWL parameters of detonation products for TKX-50-based explosives from CYLEX tests

The cylinder expansion (CYLEX) test is commonly used to describe the adiabatic expansion of the detonation products and calibrate the equation of state (EOS) of detonation products. A CYLEX test method analogous to the T-20 (pre-set position and record the time of arrival) methodology was developed utilizing a set of probes with radial displacement difference and a high-speed pulse timer to record the radial expansion displacement of the cylinder wall. Two CYLEX tests for Dihydroxylammonium 5,5'-bitetrazole-1,1'-dioxide (TKX-50)-based explosives and two for 2, 4, 6-trinitrotoluene (TNT) were conducted using the CYLEX test method developed, and further Jones-Wilkins-Lee (JWL) EOS parameters of detonation products were determined using the BP neural network and genetic algorithm (BP-GA) program. Besides, the JWL EOS parameters obtained were numerically validated by performing the simulations of the CYLEX test, where the simulation results were consistent with the experimental data.