Photochemically Driven Polymeric Biocompatible and Antimicrobial Thiol–Acrylate Nanocomposite Suitable for Dental Restoration

The development a photochemically driven polymeric composite for dental restorative materials to restore tooth cavities with antibacterial, biocompatibility, and outstanding mechanical properties is an urgent need for clinical application in stomatology. Herein, a series of polyurethane acrylate (PUA) prepolymers and antibacterial polyurethane acrylate quaternary ammonium salts (PUAQASs) were synthesized, and their mechanical and biological properties were explored. The unique secondary mercaptan with a long shelf life and low odor was used to reduce oxygen inhibition and increase cross-linking density; meanwhile, modified photocurable nano zirconia (nano ZrO₂) enhances mechanical properties of the nanocomposites and possesses preeminent dispersion in the matrix. The results show that minimal inhibitory concentrations (MICs) of PUAQASs are 200 and 800 μg/mL for Staphylococcus aureus and Escherichia coli, respectively. The addition of secondary thiols significantly increases the photopolymerization rate and monomer conversion. The highest hardness and modulus reach 1.8 and 8.7 GPa compared to 1.8 and 8.3 GPa for commercial resin. The lap shear stress on the pig bone is 912 MPa, and that on commercial resin is 921 MPa. Most importantly, the photochemically driven polymeric composite has excellent biocompatibility and significantly better antimicrobial properties than commonly used commercial resins.