焊接
焊接性
材料科学
冶金
维氏硬度试验
极限抗拉强度
韧性
母材
拉伸试验
可靠性(半导体)
结构工程
焊条电弧焊
海上风力发电
断裂韧性
热影响区
复合材料
功率(物理)
海底管道
职位(财务)
压痕硬度
断裂(地质)
作者
Eulyong Ha,Myung-Su Yi,Younghyun Kim,Jaewoong Kim
出处
期刊:Metals
[Multidisciplinary Digital Publishing Institute]
日期:2026-07-16
卷期号:16 (7): 800-800
摘要
As the demand for eco-friendly energy increases, offshore wind power structures are gradually becoming larger to increase power generation capacity, which in turn requires the use of thick TMCP steels and the securing of structural integrity. In this study, multi-pass FCAW was applied to 40 mm thick S355ML and S420ML steels in 2G and 3G welding positions, and the welding conditions for each experiment were designed to simulate actual industrial site construction conditions. After the experiments, tensile, low-temperature impact, and hardness tests were performed on the welded joints, and a comparative analysis was conducted on whether the relevant standards were satisfied and their major characteristics. As a result of the tensile test, tensile strengths exceeding the standard requirements were measured under all conditions, and base metal fracture occurred. In addition, the low-temperature impact test conducted at −50 °C exceeded the standard requirement of 27 J, ensuring sufficient low-temperature toughness, and the Vickers hardness test results were measured to be less than the reference value of 380 HV10. Through this study, the structural integrity and mechanical reliability of multi-pass FCAW welded joints for thick TMCP steel plates were secured.
科研通智能强力驱动
Strongly Powered by AbleSci AI