聚丙烯腈
材料科学
分离器(采油)
静电纺丝
电解质
电化学
膜
水溶液
化学工程
复合数
锌
多孔性
离子电导率
聚氨酯
电导率
储能
纤维
纳米纤维
复合材料
沸石咪唑盐骨架
离子
离子运输机
电化学窗口
杂原子
电阻率和电导率
锂离子电池
咪唑酯
作者
Nattapon Tanalue,Chutiwat Likitaporn,Peerawat Prathumrat,Wanwisa Limphirat,Tawan Wongsalam,Manunya Okhawilai,Pranut Potiyaraj
标识
DOI:10.1016/j.ceja.2026.101035
摘要
Aqueous zinc-ion batteries (AZIBs) are promising energy storage systems owing to their safety and low cost. However, internal short circuit failure caused by uncontrolled zinc plating is a major challenge. Here, we developed a dual-filler co-modified polyacrylonitrile (PAN)/bio-based polyurethane (PU) nanofibrous separator in which MXene was incorporated together with zeolitic imidazolate framework-8 (ZIF-8) into an electrospun 75/25 PAN/PU matrix. The concurrent presence of ZIF-8 and MXene establishes a multi-interfacial ion-regulation mechanism that homogenizes zinc ion flux and suppresses localized zinc deposition, enabling cooperative ion-transport modulation over using single-filler modification. The optimized 10%ZIF-8/MXene/PAN/PU membrane exhibited high electrolyte uptake of 2273 ± 31%, porosity of 99.4 ± 0.1%, ionic conductivity of 10.55 mS cm −1 , and a zinc ion transference number of 0.63, facilitating uniform ion transport and reduced polarization. In zinc||zinc symmetric cells, the membrane maintained stable charge-discharge profiles for over 500 hrs. Systematic studies further revealed that electrospinning parameters and filler content critically influenced fiber morphology, porosity, and electrochemical performance, highlighting the significance of design optimization. Notably, the dual-filler strategy enabled improving electrochemical characteristics, directly demonstrating that the observed performance enhancement originated from the co-modification effect of ZIF-8 and MXene. These results provide a new co-regulation design concept for high-safety separators that enhance the performance, reliability, and durability of AZIBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI