插入损耗
材料科学
微带线
耗散因子
电介质
介电损耗
宽带
光电子学
谐振器
回波损耗
表征(材料科学)
电子工程
传输损耗
高-κ电介质
无线
传播常数
散射参数
介电常数
电气工程
作者
Mahin Ahamed,Lakshmi Narasimha Vijay Kumar,Madhavan Swaminathan,Habib Hichri,Yoshio Nishimura,Takashi Yamanaka,Yuko Shibata
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2026-01-18
卷期号:: 81-84
被引量:2
标识
DOI:10.1109/pawr69496.2026.11408553
摘要
To meet the performance demands of 6G and sub-terahertz (sub-THz) systems, advanced packaging technologies require new materials with low dielectric loss and high stability. This paper presents the first broadband characterization of a newly developed Ajinomoto Build-up Film® (ABF) Type A laminated on glass substrates. The dielectric properties were evaluated from 10 GHz to 220 GHz using the microstrip ring resonator (MRR) method, while microstrip lines on 30$\mu \mathrm{m}$thick ABF A were fabricated via a Semi-Additive Patterning (SAP) process to assess insertion loss. The measured dielectric constant remained nearly constant at 3.45 ± 0.05, and the loss tangent increased gradually from 0.002 at 10 GHz to 0.009 at 220 GHz. The microstrip lines exhibited average insertion loss from 0.08 dB/mm to 0.39 dB/mm across the same frequency range. Compared to the widely used ABF Type B, Type A variant demonstrates significantly lower loss at higher frequencies. These findings highlight the potential of ABF Type A as a promising candidate for low-loss interconnects and high-frequency packaging in future 6G and sub-THz wireless applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI