地质学
覆盖层
钻孔
钻探
演习
钻头
信号(编程语言)
随钻测量
地震学
垂直地震剖面
声学
采矿工程
计算机科学
岩土工程
工程类
物理
程序设计语言
机械工程
作者
Baichun Sun,Andrej Bóna,Andrew R. King,Binzhong Zhou
出处
期刊:Geophysics
[Society of Exploration Geophysicists]
日期:2015-05-01
卷期号:80 (3): KS27-KS39
被引量:10
标识
DOI:10.1190/geo2014-0079.1
摘要
ABSTRACT A diamond drill bit is usually considered to be an inadequate seismic vibration source. To detect and use weak drill-bit-generated seismic wavefields in hard-rock drilling, we compared different coherency measures between a conventional method of semblance and a generalized multiple signal classification (MUSIC) algorithm. We tested the detectability and resolution differences between semblance and MUSIC with synthetic examples. MUSIC coherency has the advantage of higher resolution over semblance measurement when the source wavefronts are accurately predicted. In addition, we applied both methods to detect the coherent moveout of a diamond drill-bit signal from a hard rock seismic-while-drilling experiment at Hillside, South Australia. We used the coherent moveout to estimate the overburden velocity around the borehole. We also performed interferometry migration using the coherency measurements to image the drill-bit position. Our analysis determined that the direct waves generated from a diamond drill bit at shallow depths can be successfully detected, allowing drill-bit imaging and the determination of formation velocity around the borehole.
科研通智能强力驱动
Strongly Powered by AbleSci AI