钝化
兴奋剂
碳化硅
电阻率和电导率
掺杂剂
材料科学
电离
补偿(心理学)
分析化学(期刊)
钻石
宽禁带半导体
碳化物
凝聚态物理
光电子学
纳米技术
化学
离子
物理
复合材料
有机化学
量子力学
色谱法
图层(电子)
心理学
精神分析
作者
Yuanchao Huang,Rong Wang,Yiqiang Zhang,Deren Yang,Xiaodong Pi
摘要
One of the major challenges of 4H-silicon carbide (4H-SiC) is that the preparation of low resistivity p-type 4H-SiC single crystals lags seriously behind that of low resistivity n-type 4H-SiC single crystals, hindering the development of important 4H-SiC power devices such as n-channel insulated gate bipolar transistors. In particular, the resistivity of p-type 4H-SiC single crystals prepared through the physical vapor transport technique can only be lowered to around 100 mΩ cm. One of the key causes is the incomplete ionization of the p-type dopant Al with an ionization energy ∼0.23 eV. Another factor is the compensating effect. It cannot simply assume nitrogen (N) is the sole compensatory center, since the number of the compensating center is larger than the concentration of N doping. In this work, we systematically investigate the compensation of native defects and self-compensation in Al-doped 4H-SiC. It is found that the positively charged carbon vacancies (VC2+) are also the dominant compensating centers in Al-doped 4H-SiC. When the Al concentration is in the range of 1016–1019 cm−3, the concentration of holes is lower by one order of magnitude than the Al concentration because of the compensation of VC2+. As the Al concentration exceeds 1020 cm−3, the concentration of holes is only in the order of magnitude of 1019 cm−3 owing to the dominant compensation of VC2+ and supplementary self-compensation of interstitial Al (Ali3+). We propose that the passivation of VC2+ as well as quenching is effective to enhance the hole concentration of Al-doped 4H-SiC.
科研通智能强力驱动
Strongly Powered by AbleSci AI