Kaolin was modified by mechanochemical method with polymethylhydrogensiloxane.Some relative factors on the hydrophobic property were discussed.The modified kaolin samples were characterized by means of IR,BET,TEM and contact angle measurements.The results showed that the hydrophobicity of kaolin was greatly affected by the addition amount of polymethylhydrogensiloxane.The contact angle to water reached 155.98 ° and the modified kaolin showed fine particle size and better dispersion when the mass ratio of polymethylhydrogensiloxane to kaolin was 1:30.The contact angle of 155.98 ° is much larger than the contact angle of polymethylhydrogensiloxane to water.The reason of this phenomenon was discussed in this paper.