材料科学
电镀(地质)
铜
复合材料
镀铜
等离子体
聚四氟乙烯
润湿
表面粗糙度
电介质
X射线光电子能谱
图层(电子)
化学工程
冶金
光电子学
电镀
物理
地质学
工程类
量子力学
地球物理学
作者
Guoyun Zhou,Xueping Gou,Xiaofeng Jin,Shuai Wang,Wei He,Shouxu Wang,Longjiang Deng,Shijin Chen,Gen Liu
摘要
ABSTRACT The development of fifth generation communication has raised the demand of advanced polytetrafluoroethylene (PTFE) board in high‐frequency signal transmission. Drilling holes are fabricated on PTFE substrate for subsequent copper plating to achieve interlayer electrical connection between the thin dielectric layers. In this article, we propose O 2 /CF 4 plasma treatment to clean the after‐drilling PTFE hole, achieving highly activated surface for following copper plating. The plating results, in contrast with control experiments which were performed without plasma treatment, demonstrate multiple advantages of O 2 /CF 4 plasma treatment including qualified copper plating, excellent thermal shock reliability, and improved wettability. X‐ray photoelectron spectroscopy analysis for plasma‐treated samples confirms the emergence of hydrophilic groups such CO and COO/COF on PTFE hole wall. In addition, optimized parameters with particle gas flow combination and process time were obtained through parameter sweeping. The best qualified sample was associated with the lowest roughness (fractal dimension) of PTFE hole wall, indicating its promising application in high‐frequency signal transmission in PTFE board. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 48052.
科研通智能强力驱动
Strongly Powered by AbleSci AI