分离器(采油)
聚酰亚胺
材料科学
电解质
溶剂
多孔性
热稳定性
化学工程
三氟甲基
高分子化学
有机化学
化学
复合材料
物理化学
电极
物理
烷基
图层(电子)
工程类
热力学
作者
Yake Shi,Biao Yuan,Yanzhen He,Cuijia Duan,Shuo Yan,Quanfan Lin,Haibin Yu,Zan Chen,Enshan Han
标识
DOI:10.1177/0954008320988156
摘要
A series of novel porous fluorinated polyimide (FPI) separators containing trifluoromethyl group (–CF 3 ) were prepared by the non-solvent induced phase separation (NIPS) strategy. The prepared FPI separator with 60% molar content (fluorinated dianhydride: non-fluorinated dianhydride: diamine = 60: 40: 100) of fluorinated groups (FPI-60%) could stably exist in the electrolyte as a LIBs separator. The resultant FPI-60% separator possesses high thermal stability with the T g of 289.4°C and exhibits no shrinkage even at 200°C. The morphologies of the FPI-60% separators were adjusted by introducing small molecular non-solvent additives-ethanol, and the FPI-60% separators present the spongy-like and interconnected structure with different porosity as the amount of ethanol changed from 1 wt% to 10 wt%. The FPI-60% separators display excellent electrolyte uptake with 170%–200% and the ionic conductive could reach 1.17 mS/cm which is four times approximately than that of the PP separator. The lithium-ion batteries (LIBs) using FPI-60% separators with 10 wt% ethanol added show better rate capacities (102.8 mAh/g, 70.8 mAh/g of PI-10 and PP separator at 2 C, respectively) and the capacity retention rate is 93.2% after 50 cycles. The results prove that the porous FPI separator is a promising candidate for high-performance LIBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI