Microplastics generated under simulated fire scenarios: Characteristics, antimony leaching, and toxicity

Intentional or incidental thermal changes inevitably occur during the lifecycle of plastics. High temperatures accelerate the aging of plastics and promote their fragmentation to microplastics (MPs). However, there is little information available on the release of MPs after fires. In this study, an atomic force microscope combined with nanoscale infrared analysis was used to demonstrate the physicochemical properties of polypropylene (PP) plastics under simulated fire scenarios. Results showed that the chemical composition and relative stiffness of heat-treated plastic surfaces changed, significantly enhancing the generation of MPs under external forces; over (2.1 ± 0.2) × 105 items/kg abundance of MPs released from PP which were burned at 250 °C in air and trampled by a person. The leaching of antimony (Sb) from MPs in different solutions first increased and then decreased with increasing temperature, reaching a maximum at 250 °C. Higher concentrations of humic acid (10 vs 1 mg/L) caused a greater release of Sb. Furthermore, the tap water leachates of PP burned at 250 °C had the greatest effect on the growth and photosynthetic activity of Microcystis aeruginosa. Our results suggest fires as a potential source of MPs and calls for increased focus on burning plastics in future research.