化学
氢氧化锌
纳米颗粒
氢氧化物
吸附
亚硝酸盐
无机化学
氧化铈
锌
水溶液
傅里叶变换红外光谱
氧化物
核化学
化学工程
硝酸盐
有机化学
工程类
作者
Zainab J. Abdul-Zahra,Rashed Taleb Rasheed
标识
DOI:10.19261/cjm.2023.1027
摘要
Nitrite ion, a characteristic pollutant, can be removed from water by reverse osmosis, distillation, or ion exchange resin. In this study, we removed it by using ZnO and CeO2 nanoparticles. First, zinc hydroxide and cerium hydroxide were prepared by the hydrothermal method and heated at 90°C to dry. Second, they were annealed at 400°C to produce nanoparticles of ZnO and CeO2, respectively. The obtained samples were characterized by X-ray diffraction to ascertain their structure and chemical composition. The surface morphology analysis of the nanoparticles was performed using scanning electron microscopy. Atomic force microscopy was employed to characterize the imaging surface and ascertain the surface roughness. The functional groups present at the surface of the nanoparticles were investigated using the Fourier transform infrared spectroscopy method. The optical properties of these particles were investigated using the UV-visible spectroscopy. Further, the produced nanoparticles were used to adsorb NO2- ions from aqueous solutions. The results showed that the nanoparticles which were heated at 90°C (hydroxide forms) presented a higher activity for nitrite ions removal than those that were heated at 400°C (oxide forms). This may be related to nitrite ions preferential adsorption to hydroxide forms rather than to oxide forms; in both cases (90°C and 400°C), zinc oxide nanoparticles presented higher nitrite removal activity.
科研通智能强力驱动
Strongly Powered by AbleSci AI