材料科学
镍
锂(药物)
固态
阴极
原位
聚合
原位聚合
磷酸钒锂电池
化学工程
无机化学
电极
电化学
聚合物
冶金
工程物理
物理化学
复合材料
有机化学
医学
化学
工程类
内分泌学
作者
Yuqing Dai,Zihan Hou,Xin Yu,Zihan Yan,Yiman Feng,Gui Luo,Duo Deng,Wenjie Peng,Zhixing Wang,Huajun Guo,Hui Duan,Xing Ou,Junchao Zheng,Jiexi Wang
标识
DOI:10.1021/acsami.5c02163
摘要
Ultrahigh-nickel cathode active materials (CAMs) suffer from detrimental side reactions when coupled with poly(ethylene oxide) (PEO)-based electrolytes in solid-state lithium–metal batteries (SLMBs). To circumvent this issue, here we propose a surface modification strategy for ultrahigh-nickel CAMs with a self-assembled nanoscale polymer coating. Without requiring additional initiators, the residual lithium compounds inherent on the surface of the ultrahigh-nickel CAMs are used as initiators to induce the in situ anionic polymerization of the monomer. Meanwhile, oxygen vacancies are generated on the surface through the coordination of –C = O and –C ≡ N with transition metal ions, which reduces the diffusion barrier for Li + in their vicinity. Benefiting from the high voltage stability, rapid Li + transfer, and elasticity of the coating layer, the coated LiNi 0.9 Co 0.06 Mn 0.04 O 2 exhibits a capacity retention of 92% after 100 cycles when matched with PEO-based electrolytes. The pouch cell enables stable operation for 500 cycles at 1C. In addition, we propose to measure the M W of recycled PEO after cycling by gel permeation chromatography, which is direct evidence that decomposition (cleavage of the ether linkages) of PEO is inhibited. As a vision, this efficient, high-yield, and simple nanoscale coating method is expected to promote the commercial application of SLMBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI