腐蚀
材料科学
合金
冶金
学位(音乐)
水溶液
压缩(物理)
复合材料
电流密度
电流(流体)
6111铝合金
晶间腐蚀
作者
А. Yu. Ivannikov,M. A. Kudashev,Sergey Viktorovich Konushkin,R. D. Karelin,V. S. Yusupov
标识
DOI:10.3103/s0967091225701438
摘要
The corrosion resistance of high-entropy Fe–Cr–Co–Ni–Mn alloy plates obtained by cold rolling using a Kvarto-110/320 × 300 mill in a 3.5%-NaCl aqueous solution has been analyzed. The effect of the compression degree of 40, 60, and 80% on the structure, corrosion potential, and corrosion current density has been studied. It has been determined that at an increase in the compression degree from 40 to 80%, the overall corrosion resistance increases, which is determined by a decrease in the corrosion current density from 3.98 × 10–8 to 2.90 × 10–8 A/cm2. The obtained results indicate the possibility of regulating corrosion resistance by plastic deformation.
科研通智能强力驱动
Strongly Powered by AbleSci AI