材料科学
压电
钛酸钡
纳米纤维
复合材料
复合数
压力传感器
能量收集
纳米技术
3D打印
陶瓷
机械工程
能量(信号处理)
统计
数学
工程类
作者
Jingfeng Liu,Jintao Liu,Xuan Zhang,Xingang Liu,Chuhong Zhang
标识
DOI:10.1021/acsami.3c12921
摘要
Piezoelectric energy harvesters (PEHs) with porous structures, such as piezoelectric elastic sponges, exhibit high force-to-electricity conversion efficiencies owing to their excellent compression recovery properties. However, conventional preparation methods are limited to producing bulk-form sponge-like PEHs and fail to create more elaborate three-dimensional (3D) structures that could enhance conversion efficiency. Herein, we invent a composite ink consisting of waterborne polyurethane (WPU), barium titanate (BTO), and cellulose nanofibers (CNFs) that is suitable for direct ink writing (DIW) 3D printing. This ink, when coupled with freeze-drying, allows the customization of piezoelectric sponges with functional 3D structures. The printed lattice sponge exhibits remarkable compression recovery of 70% and a notably high relative sensitivity of 9.83 mV/kPa*wt % (where *wt % denotes the BTO content) across a wide pressure range of 2.98-37 kPa, which is approximately three times broader than those of other composite piezoelectric pressure sensors based on BTO or piezoceramic (PZT) materials. Furthermore, a customized 3D piezoelectric sponge with a "boomerang" configuration is utilized as an anisotropic bending sensor on the wrist for intelligently monitoring the stroke posture and programming scientific training for table tennis players. This study highlights a versatile strategy for constructing elastic sponges with high piezoelectricity and designing 3D PEH functional structures that can be applied to flexible self-powered intelligent sensing systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI