炸薯条
多路复用
材料科学
光电子学
多模光纤
波分复用
保偏光纤
纤维
光纤
波长
光学
光纤传感器
物理
电信
计算机科学
复合材料
作者
Kang Li,Chengkun Cai,Xiaoping Cao,Min Yang,Guofeng Yan,Yuanjian Wan,Guangze Wu,Kangrui Wang,Jian Wang
标识
DOI:10.1002/lpor.202300489
摘要
Abstract The emergence of optical communications has opened up new perspectives for high‐capacity data transmission and signal processing, to meet the demand of the increasing data traffic. Despite significant progress in multi‐dimensional multiplexing for capacity scaling in fiber–optic communications or photonic networks‐on‐chip, achieving high‐capacity data transmission and signal processing in an entire fiber–chip–fiber system remains a great challenge. This challenge is attributed to the lack of effective multi‐dimensional coupling between fiber and chip. Here, the 3D (de)multiplexing SiO2 chip inscribed by femtosecond laser direct writing is proposed to achieve the multi‐dimensional coupling between the few‐mode fiber (FMF) transmission link and the silicon processing network. Combined with the 2D silicon chip fabricated by a standard lithography process, a multi‐dimensional fiber–chip–fiber communication system designed to transmit and process the hybrid wavelength‐, mode‐ and polarization‐division multiplexing signals in FMF is constructed. The silicon chip integrates Mach–Zehnder interferometer (MZI) switches and arrayed‐waveguide gratings (AWGs) to serve as a reconfigurable optical add/drop multiplexer (ROADM). As a proof‐of‐concept demonstration, a 96‐channel FMF–chip–FMF communication system with a data transmission capacity of 4.032 Tbit s−1, achieving a bit‐error ratio (BER) of less than 3.8 × 10−3, is successfully implemented.
科研通智能强力驱动
Strongly Powered by AbleSci AI