High specific surface area TiO2 aerogels incorporated in situ with Co/Mn oxides as stable electrochemical capacitor electrodes

Nanocomposite aerogels comprised of TiO 2 and metal (Co and Mn) oxides are synthesized via an in situ sol–gel method in this study, and their structural, compositional and electrochemical properties are evaluated for possible applications as electrodes in energy storage devices. The inclusion of metallic oxides into TiO 2 aerogels hinder the formation of titania crystalline phases, preserved particle sizes close to their original dimensions and yielded higher specific surface areas compared to pure TiO 2 aerogels after heat treatment. High specific surface areas in aerogels positively affect the electrochemical properties, allowing a high electrochemical activity of the electrodes, in addition to intensifying the transport of ions and solvents through the mesoporous network of this material. Evaluation of the electrochemical properties of the aerogel‐based nanocomposites involves galvanostatic charge–discharge, cyclic voltammetry, and impedance spectroscopy. The nanocomposites exhibit enhanced electrochemical properties and stable performance within the range suitable for supercapacitor applications, as indicated by the Ragone chart. Notably, aerogels with higher incorporation of cobalt and manganese oxides in TiO 2 aerogels exhibit significantly elevated specific surface areas, reaching 562 and 555 m 2 g −1 , respectively. These values are notably high for nanocomposites, underscoring the potential of these electroactive materials for electrochemical capacitors.