渗透
聚砜
膜
化学工程
材料科学
气体分离
聚合物
氧化物
增塑剂
基质(化学分析)
选择性
石墨烯
色谱法
半透膜
合成膜
磁导率
膜技术
高分子化学
碳纤维
作者
Mustafa Alsaady,Sharjeel Waqas,Mohammed A. Almarshoud,Khuram Maqsood,Aymn Abdulrahman,Yuying Yan
出处
期刊:Membranes
[Multidisciplinary Digital Publishing Institute]
日期:2025-12-18
卷期号:15 (12): 386-386
标识
DOI:10.3390/membranes15120386
摘要
This research focuses on developing and optimizing mixed matrix membranes (MMMs) by incorporating graphene oxide (GO) into a polysulfone (PSF) matrix to enhance the separation performance of CO2 and CH4. The morphology and gas separation performance of the MMMs were systematically characterized. The incorporation of GO enhanced gas permeation and CO2/CH4 selectivity, as evaluated using a gas permeation setup. Notably, the PSF/GO-0.3 wt.% membrane exhibited superior performance, achieving a CO2 permeability of 21.63 Barrer, among the highest reported for PSF-based MMMs. Additionally, the membrane demonstrated a CO2/CH4 selectivity of 14.32, highlighting its effectiveness in distinguishing between the two gases, which is essential for carbon capture and natural gas decontamination applications. The uniform distribution of GO within the polymer matrix contributed to the membrane’s enhanced performance. Furthermore, the MMMs exhibited outstanding resistance to CO2 plasticization, with the PSF/GO-0.3 wt.% membrane maintaining its performance at pressures up to 10 bar, a significant improvement over the pristine PSF membrane, which failed at 4 bar. The improved plasticization resistance is ascribed to the reinforcing effect of GO, which stabilizes the polymer matrix, minimizing CO2-induced swelling. The PSF/GO-0.3 wt.% membrane exhibited exceptional CO2 permeability, selectivity, and plasticization resistance, making it a viable alternative for industrial gas separation applications and outperforming previously reported PSF-based MMMs.
科研通智能强力驱动
Strongly Powered by AbleSci AI