材料科学
折射率
灵敏度(控制系统)
共振(粒子物理)
光子晶体光纤
光学
光电子学
有损压缩
双层
温度测量
功勋
光子晶体
解调
光纤传感器
频道(广播)
光纤
导模共振
诺共振
单模光纤
抛光
干涉测量
耦合模理论
模式音量
反射(计算机编程)
纤维
大气温度范围
反共振
纳米传感器
模式(计算机接口)
极化子
Crystal(编程语言)
消散
制作
多路复用
光子学
作者
Qirui Shu,Miaomiao Yan,Ying He,Yanfang Yang
出处
期刊:Photonics
[Multidisciplinary Digital Publishing Institute]
日期:2026-08-28
卷期号:13 (9): 826-826
标识
DOI:10.3390/photonics13090826
摘要
Hyperbolic mode resonance (HMR) has emerged as a solution to conventional sensing limitations. HMR is introduced into a photonic crystal fiber (PCF) for sensing in this research. A dual-channel PCF sensor for both refractive index (RI) and temperature measurement is proposed. The device has two independent sensing channels on the dual-side polishing surface of the PCF. An Au/SnO2 bilayer in the RI channel induces HMR, while the SnO2/PDMS bilayer in the temperature channel induces lossy mode resonance, with PDMS as the temperature-sensitive material. By introducing an Au layer to excite the HMR effect, the sensor achieves enhanced resonance depth and figure of merit (FOM) without sacrificing sensitivity. When the RI ranges from 1.34 to 1.426 and the temperature varies from 25 °C to 100 °C, the optimized sensor achieves a maximum RI sensitivity of 9100 nm/RIU and a maximum temperature sensitivity of −5 nm/°C. A 2×2 sensitivity-matrix analysis confirms effective dual-parameter decoupling, with demodulation errors below 5×10−4 RIU and 0.1 °C under simultaneous RI and temperature variations. This PCF sensor offers high sensitivity, quantifiably low crosstalk, wide detection range and good fabrication tolerance, making it promising for biomedical, environmental and industrial applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI