焊接
弹道
热的
材料科学
机器人
路径(计算)
图形
机械工程
机器人焊接
工作(物理)
温度梯度
温度控制
计算机科学
生产(经济)
控制(管理)
运动规划
控制工程
运动控制
柔性制造系统
电子设备和系统的热管理
温度测量
生产率
机床
作者
Kathryn Kelly,Christopher Saldaña,Sean Wilson,Kyle S. Saleeby
标识
DOI:10.1016/j.jmapro.2026.05.048
摘要
Existing literature exploring wire-arc additive manufacturing gravitate towards the welding system and material more than the robot itself. However, the robot’s motion plays a pivotal role in the thermal history of the final part and its final mechanical properties. This study aims to challenge the notion that the robot must remain on a fixed trajectory during the entirety of the construction of the part by developing a control algorithm using graph search methods to adjust the robot trajectory based on dynamically changing temperature. Avenues from both prior simulation work and in-situ sensor monitoring are explored to study the algorithm’s impact on both production time and thermal gradient throughout a part. The cost function’s three components analyzed and minimized for the graph search are distance, temperature (changing over time), and path connectivity. The relationship between temperature distributions and production time is identified and discussed, as lower temperatures lead to larger weld times. When compared with traditional inside-out path-plans, the time for welds to reach an interpass temperature can be reduced by up to 70% when switching to a path minimizing max thermal values. Additionally, both maximum temperatures and thermal gradients decreased by nearly 100 °C when applying a branch-and-bound optimization approach with a look-ahead of four nodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI