Enhanced Bifunctional Catalytic Activity of Manganese Oxide/Perovskite Hierarchical Core–Shell Materials by Adjusting the Interface for Metal–Air Batteries

LaMnO3 perovskite is one of the most promising catalysts for oxygen reduction reaction (ORR) in metal-air batteries and can be compared to Pt/C. However, the low catalytic activity toward oxygen evolution reaction (OER) limits its practical application in rechargeable metal-air batteries. In this work, the MnO2/La0.7Sr0.3MnO3 hierarchical core-shell composite materials with a special interface structure have been designed via the selective dissolution method. The core of La0.7Sr0.3MnO3 particles is wrapped by the porous and loose MnO2 nanoparticles. The as-prepared MnO2/La0.7Sr0.3MnO3 materials have excellent catalytic activity toward ORR/OER and are used as bifunctional oxygen electrocatalysts for metal-air batteries. Based on results of transmission electron microscopy, X-ray photoelectron spectroscopy, valence-band spectroscopy, and O2 temperature-programmed desorption analysis, we conclude that the bifunctional catalytic activity of the MnO2/La0.7Sr0.3MnO3 materials can be effectively promoted due to the specific interface structure between the La1-xSrxMnO3 core and the MnO2 shell. This can be attributed to three aspects: (a) the electronic conductivity, which is beneficial for providing the faster charge-transfer paths and kinetics at the oxide/solution interface than that of the MnO2 sample; (b) the enhancement of oxygen adsorption capacity due to surface defects (oxygen vacancies) and chemical adsorption, which is helpful to improve the reaction kinetics during the process of oxygen catalysis; and (c) the tuning of oxygen adsorption ability via the moderate Mn-O bond strength, which may be conducive to getting for obtain an enhanced Mn-O bond strength on the surfaces for ORR and a weakened Mn-O bond in the lattice for OER.