耦合损耗
光学
材料科学
包层(金属加工)
绝缘体上的硅
光纤
炸薯条
波导管
塑料光纤
插入损耗
光电子学
多模光纤
物理
硅
电信
复合材料
计算机科学
作者
Jinyi Du,George F. R. Chen,Hongwei Gao,James A. Grieve,Dawn T. H. Tan,Alexander Ling
出处
期刊:Optics Express
[Optica Publishing Group]
日期:2024-03-13
卷期号:32 (7): 11406-11406
被引量:24
摘要
We report a stable, low loss method for coupling light from silicon-on-insulator (SOI) photonic chips into optical fibers. The technique is realized using an on-chip tapered waveguide and a cleaved small core optical fiber. The on-chip taper is monolithic and does not require a patterned cladding, thus simplifying the chip fabrication process. The optical fiber segment is composed of a centimeter-long small core fiber (UHNA7) which is spliced to SMF-28 fiber with less than −0.1 dB loss. We observe an overall coupling loss of −0.64 dB with this design. The chip edge and fiber tip can be butt coupled without damaging the on-chip taper or fiber. Friction between the surfaces maintains alignment leading to an observation of ±0.1 dB coupling fluctuation during a ten-day continuous measurement without use of any adhesive. This technique minimizes the potential for generating Raman noise in the fiber, and has good stability compared to coupling strategies based on longer UHNA fibers or fragile lensed fibers. We also applied the edge coupler on a correlated photon pair source and observed a raw coincidence count rate of 1.21 million cps and raw heralding efficiency of 21.3%. We achieved an auto correlation function g H (2) (0) as low as 0.0004 at the low pump power regime.
科研通智能强力驱动
Strongly Powered by AbleSci AI