起爆
燃烧室
机械
物理
质量流量
内燃机冷却
自由冷却
主动冷却
质量流
水冷
煤油
体积流量
热力学
材料科学
燃烧
燃烧室
化学
爆炸物
有机化学
作者
Jingzhe Li,Jingtian Yu,Jianghong Li,Ying Lei,Songbai Yao,Wenwu Zhang
出处
期刊:Physics of Fluids
[American Institute of Physics]
日期:2024-01-01
卷期号:36 (1)
被引量:17
摘要
To address the thermal protection challenges associated with the rotating detonation engine (RDE) in engineering applications, this study employs a three-dimensional numerical simulation based on the Eulerian–Lagrangian model to investigate the flow field of the kerosene-fueled rotating detonation with hydrogen addition. We explore the interaction between the rotating detonation flow field and the cooling air induced by multiple columns of uniformly distributed film cooling holes and also analyze the cooling effectiveness of film cooling. In the flow field where the rotating detonation wave passes through the film hole periodically at a high frequency, an increase in the number of film hole columns can decrease the fluctuation amplitude of the cooling air mass flow rate, and the recovery time of the blockage of film cooling holes shortens within a complete rotating detonation cycle. At a low injection pressure of 0.4 MPa, the cooling jet can barely be injected into the combustor. As the injection pressure increases to 0.6 and 0.8 MPa, the mass flow rate of cooling air increases significantly with enhanced cooling efficiency; however, a further rise to 1.0 MPa may result in the detachment of cooling air from the surface, without providing additional improvements in the protection area and cooling efficiency. Along the axial direction of the RDE, film cooling holes demonstrate an enhancement in cooling efficiency, which is found to maximize near the outlet.
科研通智能强力驱动
Strongly Powered by AbleSci AI