材料科学
焊接
转移模塑
返工
电子包装
吸收(声学)
倒装芯片
光电子学
复合材料
计算机科学
胶粘剂
嵌入式系统
模具
图层(电子)
作者
Liangzheng Ji,Zisen Li,Xin Wang,Guoqi Zhang,Jing Zhang,Pan Liu
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2023-11-27
卷期号:: 365-368
被引量:4
标识
DOI:10.1109/sslchinaifws60785.2023.10399660
摘要
Micro LED displays offer superior performance compared to traditional LCD and OLED displays. However, challenges in transfer technology, such as high throughput and scalability, must be addressed. Among various mass transfer techniques, stamp transfer and laser-assisted transfer are widely used for Micro LED assembly. The laser-assisted transfer technique enables high-speed and accurate transfer. Anisotropic conductive film (ACF) is commonly used for its energy absorption properties during chip transfer. However, during the subsequent thermocompression bonding process, the ACF film needs to be ruptured, which adds no value to the bonding process. To address limitations, we have developed a polymer-reinforced solder paste that demonstrates high effectiveness in absorbing impact energy during chip dropping, providing performance comparable to ACF-like materials for die receiving. It also possesses typical solder paste characteristics, enabling the formation of reliable solder joints between the chip and substrate. This material facilitates streamlined manufacturing process and providing opportunities for chip rework in subsequent stages.
科研通智能强力驱动
Strongly Powered by AbleSci AI