Schlieren imaging and spectroscopic approximation of the rotational–vibrational temperatures of a microwave discharge igniter with a resonating cavity

A microwave discharge igniter (MDI) with a resonating cavity was developed and optimized for practical applications in an internal combustion engine. In contrast to the typical microwave ignition, the resonating cavity of the MDI induces a discharge through dielectric resonance. Its source of microwave (MW) is a 2.45 GHz semiconductor oscillator that is capable of numerous oscillation patterns. To verify and demonstrate the optimum ignition performance and combustion, we varied the oscillation parameters (signal factors) of the MW to optimize the performance of the MDI using the Taguchi method. Plasma spectroscopy was used for ignition condition analysis. Two sets of microwave pulses, a first pulse followed by a second set of pulse bursts, were used to ignite a propane-air fuel. The flame kernel growth rate and O I species generation were used as the response outputs, which were obtained, respectively from Schlieren imaging and emission spectroscopy experiments. The extended pulse periods and higher MW pulse numbers of the second set of pulses improved the response outputs of the MDI. To further analyze the effect of MW oscillation patterns on plasma properties and performance, measurements were done on MW superimposed operation with the high-voltage ignition from spark plugs. The MW transmission on a typical spark plug enhanced the air plasma ignition. Higher input MW energy and more extended MW pulse widths results in increased spectral intensity and radical generation of OH, O, and N2. An inverse relation between the temperature and spectral intensity functions of the MW pulse width was observed, which was attributed to the cutoff density of the MW-enhanced plasma.