过电位
非阻塞I/O
材料科学
化学工程
催化作用
多硫化物
纳米颗粒
电极
纳米技术
硫黄
基质(水族馆)
电化学
碳纤维
化学
复合材料
有机化学
冶金
电解质
复合数
物理化学
工程类
海洋学
地质学
作者
Qian Guo,Xiaoxiao Liu,Xiaotao Ma,Yu Li,Donghong Duan,Xianxian Zhou,Fuxiang Li,Shibin Liu
标识
DOI:10.1016/j.jallcom.2022.166764
摘要
Designing electrodes with structures suitable for storing and fixing sulfur to overcome the inherent shortcomings of lithium-sulfur (Li–S) batteries is an effective approach to achieving commercial application. Indeed, multifunctional electrodes constructed with sulfur immobilization substrate and efficient catalyst has dramatically improved the utilization of sulfur. However, structurally designing the substrate and achieving uniform dispersion of catalytic remain huge challenges. In this paper, a metal-organic frameworks derived flower shaped nitrogen doped carbon (NC) materials anchored with core-shell Ni-NiO nanoparticles loaded on carbon paper (CP) was fabricated, which equipped with 3D conductive network and hierarchical porous structure physically restrict polysulfide shuttling. Furthermore, well-proportioned Ni-NiO nanoparticles were induced into host to bond with polysulfides further catalyzed the electrochemical reaction. Notably, the [email protected]@NC/CP exhibited high specific capacity with 1332.9 mAh/g initial specific capacity at 0.5 C and maintained at 896.3 mAh/g after 200 cycles. And [email protected]@NC/CP can achieves an initial capacity of 1095.7 mA h g−1 even with high sulfur loading of 4.6 mg/cm2. Electrochemical test results indicated that the introduction of Ni-NiO catalyst can improve the kinetics and reduce the reaction overpotential (ηE), and further affects the value of concentration overpotential (ηC) ultimately leads to the increase of battery capacity.
科研通智能强力驱动
Strongly Powered by AbleSci AI